- Model NO.: SPU-301
- Appearance: Liquid
- Method: Spray
- Drying Method: Air Drying
- Substrate: Concrete
- Trademark: Yuhong
- HS Code: 3208901090
- Color: Black
- Main Raw Material: Polyurethane
- Level: Primer
- Certification: ISO14001, CCC, RoHS
- Components: Solvent
- Origin: China
One Component Polyurethane Waterproof Coating
SPU-301 is a one component moisture-curing polyurethane waterproof coating
especially used for horizontal plane. When this coating is applied on surface substrate,
it has chemical reaction with the moisture in the air, and then it will form a seamless
Where to use
- Parking garages;
- Subways in open cut method;
- Kitchen or bathroom;
- Floors, balcony and unexposed roofs;
- Swimming pools, man-made fountain and other pools;
- Good tensile strength and elongation;
- Both high and low temperature resistance;
- Strong adhesive;
- Seamless, no pinholes and bubbles;
- Resistance to long-term water erosion;
- Corrosion-resisting and mould-resisting;
- Convenient to apply.
ASTM C 836
SPU-301 is sealed in 20kg pails and transported in wooden cases. Each wooden case can be contained 36 pails of SPU-301.
SPU-301 material should be stored by sealed pails at dry and well-ventilated places and protected from sun or rain. The temperature in stored places can not be higher than 40° C. It can not be closed to fire sources. The normal shelf life is 6 months.
SPU-301 is needed to be avoided sunshine and rain. Fire sources are forbidden during transportation.
- Constructive System
- Application Method
Surfaces should be dry, stable, clean, smooth, without pockmarks or honeycombs and free from any dusts, oil or loose particles. Cracks and surface irregularities need to be filled by sealants and do additional waterproofing. For smooth and stable surfaces, this step can be skipped.
Paint SPU-301 as additional layer to enhance at internal and external corners, drain pipes, floor drains or embedded parts.
Application of waterproof coated membrane
It can use rubber scrapers or spray equipments to paint 2 or 3 times. After fully dry, it can be painted again. The normal time between each painting is 24 hour. The direction of second time painting needs to be perpendicular to the first time painting.
Application of protection layer
After waterproof coated membrane is fully dry and meets quality requirements, it can begin application of protection layer.
- The temperature for application of SPU-301 should be above 5ºC.
- SPU-301 needs to be consumed instantly and can not be diluted with solvent.
- The storage and application places should be well-ventilated and no fire.