Self-Adhesive Modified Bitumen Waterproof Membrane For Roof Cushion
Description
Self-Adhesive Modified Waterproofing Membrane supplied with 200 gsm tough non-woven geotextile as the upper finish layer and the underface with transparent release film. Supplied in 1 m x 15 m roll.
Product Description :
(a) Upper finish layer of 200 gsm non-woven geotextile topping (can be made same as sample suppliedby customers) fused onto :
(b) the Middle layer of 1.1 mm thickness Self-Adhesive SBS Modified Bitumen Membrane (can be made same as sample suppliedby customers).
(c) the underface layer of transparent release film (can be made same as sample suppliedby customers).
(d) The Membrane shall have a 75 mm wide selvedge for overlap with another Membrane (can be made same as sample suppliedby customers).
Where to use
Advantages
- The combination of polyester fiber and SBS modified bitumen is showed good performance on waterproofness;
- It will be a high-strength membrane to resist water;
- Puncture-resisting, tear-resisting, corrosion-resisting, mould-resisting and weather-resisting;
- Good tensile strength and elongation;
- Strong adaptability for substrate shrinkage, deformation and cracks;
- Both high and low temperature resistance, especially in cold areas;
- Convenient to apply: use heat fusion method in all seasons;
- Dampproof and Seepage-proofing
Storage
Should be stored in well-ventilated shade place and protected from sun or rain. The temperature in stored places can not be higher than 50° C. It only can be put vertically in single-level. The normal shelf life is 1 year.
Audited Supplier 
){kind=link}
){kind=link}