Ys-211 Modified Silicone Ms Nail Free Adhesive for Construction

Product Details
Application: Construction
Bonding Function: Structural Adhesive
Color: White
Still deciding? Get samples of $ !
Request Sample
Gold Member Since 2013

Suppliers with verified business licenses

Audited Supplier Audited Supplier

Audited by an independent third-party inspection agency

Number of Employees
745
Year of Establishment
1998-03-30
Find Similar Products

Basic Info.

Composition
Organic Material
Transport Package
300ml Cartridge
Trademark
Oriental Yuhong

Product Description

Technical Date Sheet(TDS)
  1. Description
YS-211 Modified silicone MS nail free adhesive for construction is a single-component non-sagging sealing material made of internationally leading modified silicone prepolymer as the main raw material. During construction, glue gun is used to apply the sealant to the bonding base layer in a point or linear manner to form a high-strength bonding layer.
  1. Use
YS-211 is suitable for bonding, sealing and repairing cracks on different substrates such as metal, stone, concrete, wood panels, ceramics, etc. It has high-strength elastic bonding properties. It is often used for bonding and fixing mirrors, signs, handles, decorative pendants, marble, wooden floors, tiles and other parts.
  1. Advantages
  • High bonding strength, good initial bonding effect, widely applicable to a variety of substrates
  • Solvent-free, zero formaldehyde, environmentally friendly and odorless, green, healthy and safe
  • Elastic bonding, no damage to the base surface, no residue
  • Low viscosity, good extrusion, easy to operate and easy to use
  1. Product Details
  2. Technical Information
Item Description
Type Single component
Color White
Packaging 300ml cartridge
JC/T 2186-2013 nail free adhesive for interior wall light decorative board
Items Technical Specifications (R Body Type) Typical Value
Sag resistance Transverse direction 3 0
Longitudinal direction 3 0
Workability Fiber Cement Board Type A >50% 70
Fiber Cement Board Type B >75% of the bonding area of A board 90
Tensile shear strength/MPa Standard conditions (24h) 1.5 1.5
Standard conditions (168h) 2.5 2.6
Heat treatment 2.5 2.6
Wet substrate 1.5 1.5
After high-temperature storage (40ºC) 2.0 2.1
Shear deformation under static load No cracking, no delamination No cracking, no delamination
Initial anti-slip property/mm 2 0
Total volatile organic compounds (TVOC)/(g/L) 100 10
Solid content /% 60 99.0
  1. Storage and Shelf life
During transportation, keep away from moisture, rain, sun, high temperature, heat source, handle with care, and avoid squeezing and collision.
The product should be stored in a ventilated, dry, cool place, and avoid direct sunlight. Isolate from fire and heat source. The storage temperature is 5ºC~30ºC. The shelf life of the product is 12 months if the packaging is well sealed.
  1. Notice
  • Please strictly follow the operating process to avoid bonding failure.
  • Before use, ensure that the sealant is within the shelf life. Please use it up within half an hour after the nozzle is cut. If the colloid at the nozzle outlet hardens, clean the solidified glue and continue to use the remaining sealant.
  • Before curing, avoid contact with eyes and skin. If it comes into contact with the skin, first scrub with soapy water or alcohol, then rinse with clean water; if it comes into contact with the eyes, first rinse with plenty of clean water, and seek medical treatment immediately if necessary. It is not advisable to apply glue on the surface of the substrate that has been applied with silicone glue.
  1. Health and Safety
Please read the safety manual carefully, our security experts will be pleased to give you advises about safety, health and environmental issues.
  1. Product Responsibility
The above information and recommendations which are based on our experience are as for reference,
they can't replace the customers' own experimental results. In any application, the customer shall be
responsible comply with obligations of third-party intellectual property rights. Without our consent,
anyone shall not provide technical information to third parties.
  1. Other Information 
Company name:Beijing Oriental Yuhong Waterproof Technology Co., Ltd
Address:No.19, Kechuang 9th Street, BETDA, P.R. Beijing, China 101111.
   
 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier