Description APP-PYPE is a waterproofing modified bitumen base sheet consisting of atactic polypropylene (APP) or amorphous poly-α-olefin (APAO, APO) modified asphalt reinforced with polyester fiber covering with polyet- hylene surfacing. There have three kinds of thickness: 3 mm, 4 mm and 5 mm.
Where to use
Roofs or undergrounds;
Pools, such as swimming pools, fire pools;
Subways, tunnels, concrete road or bridge surfaces;
Sewage plants, garbage burying projects;
Penstocks.
Advantages
The combination of polyester fiber and APP modified bitumen is showed excellent performance on waterproofness;
It will be a high-strength membrane to resist water;
Puncture-resisting, tear-resisting, corrosion-resisting, mould-resisting and weather-resisting;
Excellent tensile strength and elongation;
Strong adaptability for substrate shrinkage, deformation and cracks;
High temperature resistance(130° C);
Convenient to apply: use heat fusion method in all seasons.
Standards EN 13707
Packaging APP-PYPE material is packed in rolls with plastic bags.
Storage APP-PYPE material should be stored in well-ventilated shade place and protected from sun or rain. The temperature in stored places can not be higher than 50° C. It only can be put vertically in single-level. The normal shelf life is 1 year.
Transportation APP-PYPE material can not be inclination or lateral drift. Cover with cloth when it is necessary.
Application System Yuhong modified bitumen membrane waterproof system includes substrate, undercoat, membrane waterproof layer, protection and isolation layer. Yuhong also provide a complete line of compatible accessories and components, including primers, adhesives for membrane, pipe clamps, terminal battens and screws.
Application Method Surface preparation Surfaces should be dry, clean, smooth and free from any dusts, oil or loose particles. Cracks and surface irregularities need to be filled by polymer mortar. Priming Before membrane laying, substrate treating agent need to be brushed evenly and completely cover all laying places. Membrane Laying For adhesion between membrane and substrate or membranes, it can use hot melt method or cold adhesion method. According to application designs and specific applied parts, it can be applied by fully adhered method, strip adhered method and border adhered method. Sealing, fixing and constraining on vertical surfaces On vertical surfaces, fix with metal battens and seal with sealants for membranes. Application on protection and isolation layer After membrane laying, apply on protection and isolation layer according to waterproof layer design.
Audited Supplier 
){kind=link}